Furuno MULTI-COMMUNICATION UNIT IB-782 Instrukcja Użytkownika

MULTI-COMMUNICATION UNITIB-782

2 1.2 Calling Below is the procedure for how call a land subscriber, make a ship-to-ship call. 1. Pick up the handset and dial “0” (number for con

31.4 Intercom The intercom function is available when two or more telephones are connected to the IB-782. It allows communication between the telepho

4 Calling from communication unit’s telephone to IB-782’s telephone 1. Pick up the receiver and listen for the dial tone. 2. Dial [*], [3], [0], p

51.7 Receive-Only Telephone Any telephone connected to the IB-782 can be designated as a “receive-only telephone.” This requires setting of a DIP swi

6 2. SETTINGS 2.1 PBX Mode Settings Set the PBX mode from handset connected to the communication unit of the FELCOM 82 to enable use of the IB-782.

72.2 OID/DID Setting Set the ID number of each telephone connected to the IB-782, from the handset connected to the communication unit. The two-digit

8 2.3 DIP Switch Setting SW No. Function Default Setting ON OFF 1 How to connect to Inmarsat services OFF Connect with OFF HOOK. Connect by di

93. MAINTENANCE WARNINGDo not open the equipment.Only qualified personnelshould work inside theequipment. 3.1 Cleaning Dust or dirt can be removed

10 4. INSTALLATION 4.1 Mounting Mounting considerations The IB-782 can be mounted on a desk or on a bulkhead. Keep the following points in mind when

114.2 Wiring Follow the illustration below to wire the IB-782. 1APOWER100V-220VAC 50-60HzTelephoneFacsimileGround TerminalMULTI-COMMUNICATION UNIT IB

C 9-52, Ashihara-cho, Nishinomiya, Japan Telephone: 0798-65-2111 Telefax: 0798-65-4200 Your Local Agent/Dealer All rights re

SP - 1 8/8/01 SPECIFICATIONS OF THE MULTI-COMMUNICATION UNIT IB-782 1. GENERAL (1) Outside line 1 (2) Extension line 8 (3) Dialing Method NTT PB

iSAFETY INSTRUCTIONSWARNINGImmediately turn off the power at theswitchboard if water leaks into theequipment or something is dropped inthe equipment.

ii Safety Instructions for the InstallerWARNINGTurn off the power at the switchboardbefore beginning the installation.Fire or electrical shock can r

iiiTABLE OF CONTENTS FOREWORD...iv SYSTEM CO

iv FOREWORD A Word to the Owner of the IB-782 FURUNO Electric Company thanks you for purchasing the IB-782 Multi-Communication Unit. We are confident

vSYSTEM CONFIGURATION : OptionCOMMNUNICATIONUNITIB-282ANTENNAUNITIB-180ANTENNAUNITIB-182MULTI-COMMUNICATIONUNITIB-782JUNCTION BOXIB-313TEL or FAX100-

vi EQUIPMENT LIST Name Type Qty Remarks Multi-Communication Unit IB-782 Installation Materials — 1 set • Power cable (3 m) • Tapping screw

11. OPERATION 1.1 Equipment Overview The [POWER] switch is located on the rear panel. When the power is applied, the diagnostic test checks the equip